1. Physical stick you already damaged
2. Most likely there is a problem in the USB drivers
3. The USB port is damaged (Port = Place for the USB)
4. BIOS Setting, Windows has problems
For damage caused by number one you might have trouble repairing itself. Even I myself prefer to buy new because it is quite complicated and difficult to fix. But for the damage caused sucked computer blog will share how to cope with the flash is not legible on the pc. Please read and practice the following way
First please insert flash drive to a laptop / computer.
Then you Go to Start -> Control Panel
Change the appearance of so (switch to classic mode).
- Click "Add Hardware"
- Then it will appear a dialog box, then click next course.
- Then there are 2 options "Yes, I have already connected the hardware" and "No, I have not added the hardware yet". eat you have to choose the option Yes.
- Then the next on your computer system will check for the presence of external hardware you are already on the flash plug it into the laptop but not detected by the computer / laptop. If successfully detected by the computer / laptop, then it will appear autorun. With the emergence of this Autorun stating that you are successful and so that connections can be faster USB Drive, comes icon "Removable hardware" on system tray and the new drive appears in Windows Explorer or My Computer.
- When one of the things that took place, the detection need not be forwarded. Click Cancel on the next appearance.
- how to fix the flash that is not readable by cmd
- First please insert flashdisk to a laptop / computer.
- Open Command Prompt, stride click Start - Run - cmd write or detail please read the previous article How To Open CMD in Windows 7.8.10
- Open your flash place for example in G, written at the command prompt g:
- Then you write chkdsk / f, then the writing will appear, and there will be a choice (Y / N). write Y for yes.N for no
- Then, there will be another option to restart your computer, specify yes to restart your computer. Let the system run after winlogon.
- If the "cmd" can not get into the usb drive, the above still can be done from any drive, with the command:
- chkdsk (: e / f / g drive usb) / ...
How to Fix Unreadable Flashdisk using software
This is an alternative way that can not be managed friends use when using two ways above. But I often use the above two ways compared using software HDD low level format. If your USB flash unreadable but disappeared shortly containing shrinking memory space that may be hidden by the virus. You can download file from the link below.
Download
Bonus stick Easy Ways to Fix Damaged
1. First please insert flashdisk to a laptop / computer.
2. If you do not want to, try dislodged after that insert again (repeat these steps 3X)
3. If you still do not want too. Time still try to shake your flash plug while pressed enter. In order for the computer to obtain Rangsan of flash.
Thus Easy Ways to Fix Damaged flash unreadable
Thus tutorial How to Fix Unreadable Flashdisk Hope it is useful!!
0 komentar:
Post a Comment